About UsProductsServicesQualityCustomers

HomeHaat AdvantagesMyths & FactsFAQ'sNews & InfoEnquirySitemapContact Us

Upstream & Downstream Equipment

Automatic Loading System:

Different types of loading systems can be made on request. As an example a ram loader is shown below.

Belt Conveyor

Auto Loader

(Click on the image to magnify)

Automatic De-ashing System :

The solid refractory hearth of the incinerator is so designed as to permit forward/reverse movements at the same pre-determined intervals i.e., after completion of the combustion process. The ash that is collected in the chamber is then transferred to a rotary feeder that is mounted below the hearth that, in turn, is connected to a screw conveyor. The ash is transferred from the rotary feeder to the screw conveyor that transfers the collected ash to an ash bin at the end of the conveyor. The rotary feeder ensures only small amounts of high temperature ash are collected and dropped into the screw conveyor every time so that the system is not subjected to very high temperatures with large quantity of ash.
 

Screw Conveyor  

Screw Conveyor

 

(Click on the image to magnify)

 

Heat Recovery Systems

Different forms of heat recovery can be provided such as,

  • Waste pre-heating

  • Generation of hot water / steam, etc.

Cyclone Dust Collectors:

These are dry scrubbers where particulates from the gas are forced to turn larger particles with high momentum, collide with the wall and are collected.

Venturi Scrubber:

Systems that use the reduction in cross-selection area in gas flow path to increase velocity and pressure drop causing particles of pollutants in the gas to shear water droplets and to be collected.

Chimneys:

Different types of chimneys can be made depending on requirements. They can be guy rope supported, self-supported, wall mounted, lined with rubber or refractory.

Self Supporting Chimney Cyclone Separator

Self Supporting Chimney

Cyclone Separator

(Click on the image to magnify)

(Click on the image to magnify)

 

Flue gas monitoring device :     

For the measurement of CO, CO2 and O2 in gaseous emission. Other gas testing also possible.
 

 

Flue gas monitoring device

(Click on the image to magnify)

 

Customised panel boards :     

Pedestal mounted, vermin and dust proof, complete with connectors, fuses, ON/OFF switches, indicating lamps, temperature indicators, MCBs, mimic panel and recording device
 

 

Panel Board

(Click on the image to magnify)

 

PLC :

System control by programming for different safety measures and interlocks.

 

PLC

(Click on the image to magnify)

Top 

 
 

 

Copyright Notice  |  Privacy Policy  |  Liability Disclaimer   


Google
 
Web www.haat-india.com

eNabled by mindworks